Accessories

Sanden SD 508 Single wide-groove pulley Standard Finish for 3/4 inch belt

Note: The single wide-groove pulley measures 5/8 inch wide at outer-groove edge. You must use a 3/4 inch wide belt for proper belt contact and grip.

Sanden SD 508 Single wide-groove pulley Polished Finish for 3/4 inch belt

Note: The single wide-groove pulley measures 5/8 inch wide at outer-groove edge. You must use a 3/4 inch wide belt for proper belt contact and grip.

Sanden SD 508 Compressor 7-Groove serpentine pulley Standard Finish

The SD 508 compressor is recommended for any Vintage Air system. It pumps 8.4 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD 508 Compressor 7-Groove serpentine pulley Polished Finish

The SD 508 compressor is recommended for any Vintage Air system. It pumps 8.4 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD 508 Compressor Double V-groove pulley standard finish

The SD 508 compressor is recommended for any Vintage Air system. It pumps 8.4 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD 508 Compressor Double V-groove pulley Polished Finish

The SD 508 compressor is recommended for any Vintage Air system. It pumps 8.4 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Evaporator Thermostat Rotary 18 IN

Evaporator Thermostat Lever 42 IN

Evaporator Thermostat Rotary 48 IN

SureFit system Cable Converter unit

Replacement Servo Motor for Gen II Systems

Gen II Super Gen II Compac Heat Cool Only PC Board Assembly

Comes with wiring harness plugs and ABS board box