Accessories

Sanden SD 709 Compressor 8-Groove serpentine pulley Polished Finish

The SD 709 compressor is recommended for any Vintage Air system. It pumps 9.5 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD-7B10 Compressor 6-groove serpentine pulley Standard Finish

Compact but high-performance compressor. It pumps 6.1 cubic inches per revolution with a maximum 9000 sustained RPM range. (Model SD-7B10).

Sanden SD-7B10 Compressor 6-groove serpentine pulley Polished Finish

Compact but high-performance compressor. It pumps 6.1 cubic inches per revolution with a maximum 9000 sustained RPM range. (Model SD-7B10).

Sanden SD 508 Rear Exit Compressor Double V-groove pulley Rear Exit Standard Finish

Excellent solution to low hood clearance issues. SD 508 compressor with rear exit #8 and #10 male 0-ring fittings. Compatible with standard female O-ring fittings. Also 90-degree TiteFit fittings.

Sanden SD 508 Rear Exit Compressor Double V-groove pulley Rear Exit Polished Finish

Excellent solution to low hood clearance issues. SD 508 compressor with rear exit #8 and #10 male 0-ring fittings. Compatible with standard female O-ring fittings. Also 90-degree TiteFit fittings.

Sanden SD 508 Rear Exit Compressor 7-Groove serpentine pulley Rear Exit Standard Finish

Excellent solution to low hood clearance issues. SD 508 compressor with rear exit #8 and #10 male 0-ring fittings. Compatible with standard female O-ring fittings. Also 90-degree TiteFit fittings.

Sanden SD 508 Rear Exit Compressor 7-Groove serpentine pulley Rear Exit Polished Finish

Excellent solution to low hood clearance issues. SD 508 compressor with rear exit #8 and #10 male 0-ring fittings. Compatible with standard female O-ring fittings. Also 90-degree TiteFit fittings.

Under Dash Heritage Pod Louver Assembly with turned finish. New under dash louver option for your Vintage Air Magnum or Gen II Super. Gives you the classic look of a “knee knocker” unit with the full functionality of an in-dash system.

Sanden SD 709 Compressor 7-Groove serpentine pulley Standard Finish

The SD 709 compressor is recommended for any Vintage Air system. It pumps 9.5 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD 709 Compressor 7-Groove serpentine pulley Polished Finish

The SD 709 compressor is recommended for any Vintage Air system. It pumps 9.5 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD 709 Compressor Double V-groove pulley Standard Finish

The SD 709 compressor is recommended for any Vintage Air system. It pumps 9.5 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD 709 Compressor Double V-groove pulley Polished Finish

The SD 709 compressor is recommended for any Vintage Air system. It pumps 9.5 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets