Accessories > Compressors

Sanden SD 508 Rear Exit Compressor 7-Groove serpentine pulley Rear Exit Polished Finish

Excellent solution to low hood clearance issues. SD 508 compressor with rear exit #8 and #10 male 0-ring fittings. Compatible with standard female O-ring fittings. Also 90-degree TiteFit fittings.

Sanden SD 709 Compressor 7-Groove serpentine pulley Standard Finish

The SD 709 compressor is recommended for any Vintage Air system. It pumps 9.5 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD 709 Compressor 7-Groove serpentine pulley Polished Finish

The SD 709 compressor is recommended for any Vintage Air system. It pumps 9.5 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD 709 Compressor Double V-groove pulley Standard Finish

The SD 709 compressor is recommended for any Vintage Air system. It pumps 9.5 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD 709 Compressor Double V-groove pulley Polished Finish

The SD 709 compressor is recommended for any Vintage Air system. It pumps 9.5 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD 508 Single wide-groove pulley Standard Finish for 3/4 inch belt

Note: The single wide-groove pulley measures 5/8 inch wide at outer-groove edge. You must use a 3/4 inch wide belt for proper belt contact and grip.

Sanden SD 508 Single wide-groove pulley Polished Finish for 3/4 inch belt

Note: The single wide-groove pulley measures 5/8 inch wide at outer-groove edge. You must use a 3/4 inch wide belt for proper belt contact and grip.

Sanden SD 508 Compressor 7-Groove serpentine pulley Standard Finish

The SD 508 compressor is recommended for any Vintage Air system. It pumps 8.4 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD 508 Compressor 7-Groove serpentine pulley Polished Finish

The SD 508 compressor is recommended for any Vintage Air system. It pumps 8.4 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD 508 Compressor Double V-groove pulley standard finish

The SD 508 compressor is recommended for any Vintage Air system. It pumps 8.4 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD 508 Compressor Double V-groove pulley Polished Finish

The SD 508 compressor is recommended for any Vintage Air system. It pumps 8.4 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

NO 6 Compressor Pressure-Shipping Cap

If you should need to ship your compressor to us for service or replacement these caps will keep the compressor refrigerant from leaking into the packaging.