Accessories > Compressors

NO 8 Compressor Pressure-Shipping Cap

If you should need to ship your compressor to us for service or replacement these caps will keep the compressor refrigerant from leaking into the packaging.

NO 10 Compressor Pressure-Shipping Cap

If you should need to ship your compressor to us for service or replacement these caps will keep the compressor refrigerant from leaking into the packaging.

Sanden SD 508 Compressor 7-Groove serpentine pulley Chrome Finish

The SD 508 compressor is recommended for any Vintage Air system. It pumps 8.4 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD 508 Compressor Double V-groove pulley Chrome Finish

The SD 508 compressor is recommended for any Vintage Air system. It pumps 8.4 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD 709 Compressor 7-Groove serpentine pulley Chrome Finish

The SD 709 compressor is recommended for any Vintage Air system. It pumps 9.5 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD 709 Rear Exit Compressor 7-Groove serpentine pulley Rear Exit Chrome Finish

Excellent solution to low hood clearance issues. SD709 Compressor with rear exit #8 and #10 male 0-ring fittings.

Sanden SD 709 Rear Exit Compressor 7-Groove serpentine pulley Rear Exit Polished Finish

Excellent solution to low hood clearance issues. SD709 Compressor with rear exit #8 and #10 male 0-ring fittings.

Sanden SD 709 Rear Exit Compressor 7-Groove serpentine pulley Rear Exit Standard Finish

Excellent solution to low hood clearance issues. SD709 Compressor with rear exit #8 and #10 male 0-ring fittings.

Sanden SD 508 Rear Exit Compressor 7-Groove serpentine pulley Rear Exit Chrome Finish

Excellent solution to low hood clearance issues. SD 508 compressor with rear exit #8 and #10 male 0-ring fittings. Compatible with standard female O-ring fittings. Also 90-degree TiteFit fittings.

Sanden SD 508 Rear Exit Compressor Double V-groove pulley Rear Exit Chrome Finish

Excellent solution to low hood clearance issues. SD 508 compressor with rear exit #8 and #10 male 0-ring fittings. Compatible with standard female O-ring fittings. Also 90-degree TiteFit fittings.

Sanden SD-7B10 Compressor 6-groove serpentine pulley Chrome Finish

Compact but high-performance compressor. It pumps 6.1 cubic inches per revolution with a maximum 9000 sustained RPM range. (Model SD-7B10).

Sanden SD-7B10 Front Runner Compressor Double V-groove pulley, Chrome Finish

Compact but high-performance compressor used on our award-winning Front Runner Accessory Drive systems. It pumps 6.1 cubic inches per revolution with a maximum 9000 sustained RPM range. Use only with our pulleys engineered specifically for this compressor (Model SD-7B10).