Builder Series

Create your own Vintage Air climate control system with one of our universal Builder's Series kits. Each kit includes an Evaporator Kit, a Sanden Compressor, a Compressor Mounting Bracket, a Universal Hose Kit, a Condenser, and a Safety Switch. When ordering a Builder Series kit, our team of experts will assist you in taking all of the measurements needed for ordering and walk you through the options available.
Sort by:
Vacuum ShortPac - Heat and Cool
Part #: 05000-VUX-A
Price: $399.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Vacuum ShortPac - Heat and Cool.

FITS WHERE OTHER SYSTEMS WON'T
The ShortPac's exclusive cube shaped evaporator allows installation of air conditioning where a conventional horizontal evaporator will not fit.
Vacuum ShortPac - Heat, Cool and Defrost
Part #: 05000-VUZ-A
Price: $460.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Vacuum ShortPac - Heat, Cool and Defrost.

FITS WHERE OTHER SYSTEMS WON'T
The ShortPac's exclusive cube shaped evaporator allows installation of air conditioning where a conventional horizontal evaporator will not fit.
Mini Slimline Under Dash System - Heat and Cool
Part #: 10301-VUX-A
Price: $325.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Mini Slimline Under Dash System - Heat and Cool, passenger side fittings

MINI SLIMLINE SYSTEM
A simple solution to A/C installation. This system has been engineered to provide great cooling capacity and air delivery in a smaller vehicle cab.

CONTROLS Uses standard under dash control pod. Included with kit.
Mini Slimline Under Dash System - Cool Only
Part #: 10301-VUY-A
Price: $299.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Mini Slimline Under Dash System - Cool Only, passenger side fittings

MINI SLIMLINE SYSTEM
A simple solution to A/C installation. This system has been engineered to provide great cooling capacity and air delivery in a smaller vehicle cab.

CONTROLS Uses standard under dash control pod. Included with kit.
Mini Slimline Under Dash System - Heat and Cool with Black Louvers
Part #: 10401-VUX-A
Price: $325.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Mini Slimline Under Dash System - Heat and Cool with black louvers, passenger side fittings

MINI SLIMLINE SYSTEM
A simple solution to A/C installation. This system has been engineered to provide great cooling capacity and air delivery in a smaller vehicle cab.

CONTROLS Uses standard under dash control pod. Included with kit.
Mini Slimline Under Dash System - Cool Only with Black Louvers
Part #: 10401-VUY-A
Price: $299.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Mini Slimline Under Dash System - Cool Only with black louvers, passenger side fittings

MINI SLIMLINE SYSTEM
A simple solution to A/C installation. This system has been engineered to provide great cooling capacity and air delivery in a smaller vehicle cab.

CONTROLS Uses standard under dash control pod. Included with kit.
Slimline Under Dash System - Heat , Cool and Defrost
Part #: 11300-VUZ-A
Price: $360.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Slimline Under Dash System - Heat , Cool and Defrost

SLIMLINE SYSTEMS - All new evaporator coil configurations! This new and improved coil design moves the heater lines to the passenger side along with the A/C lines for easier installation. These value priced systems have been engineered to provide excellent cooling capacity and air delivery in a compact under dash package. Both units feature built-in controls and louvers.
Slimline Under Dash System - Heat and Cool
Part #: 11301-VUX-A
Price: $330.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Slimline Under Dash System - Heat and Cool, passenger side fittings.

SLIMLINE SYSTEMS - All new evaporator coil configurations! This new and improved coil design moves the heater lines to the passenger side along with the A/C lines for easier installation. These value priced systems have been engineered to provide excellent cooling capacity and air delivery in a compact under dash package. Both units feature built-in controls and louvers.
Slimline Under Dash System - Cool Only
Part #: 11301-VUY-A
Price: $305.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Slimline Under Dash System - Cool Only, passenger side fittings.

SLIMLINE SYSTEMS - All new evaporator coil configurations! This new and improved coil design moves the heater lines to the passenger side along with the A/C lines for easier installation. These value priced systems have been engineered to provide excellent cooling capacity and air delivery in a compact under dash package. Both units feature built-in controls and louvers.
Slimline Under Dash System - Heat , Cool and Defrost with Black Louvers
Part #: 11400-VUZ-A
Price: $360.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Slimline Under Dash System - Heat , Cool and Defrost with Black Louvers

SLIMLINE SYSTEMS - All new evaporator coil configurations! This new and improved coil design moves the heater lines to the passenger side along with the A/C lines for easier installation. These value priced systems have been engineered to provide excellent cooling capacity and air delivery in a compact under dash package. Both units feature built-in controls and louvers.
Slimline Under Dash System - Heat and Cool with Black Louvers
Part #: 11401-VUX-A
Price: $330.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Slimline Under Dash System - Heat and Cool with Black Louvers, passenger side fittings

SLIMLINE SYSTEMS - All new evaporator coil configurations! This new and improved coil design moves the heater lines to the passenger side along with the A/C lines for easier installation. These value priced systems have been engineered to provide excellent cooling capacity and air delivery in a compact under dash package. Both units feature built-in controls and louvers.
Slimline Under Dash System - Cool Only with Black Louvers
Part #: 11401-VUY-A
Price: $305.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Slimline Under Dash System - Cool Only with Black Louvers, passenger side fittings.

SLIMLINE SYSTEMS - All new evaporator coil configurations! This new and improved coil design moves the heater lines to the passenger side along with the A/C lines for easier installation. These value priced systems have been engineered to provide excellent cooling capacity and air delivery in a compact under dash package. Both units feature built-in controls and louvers.
Gen II Heater with Defrost and Servo Door Control
Part #: 506101
Price: $229.00

Gen II Heater with Defrost and Servo Door Control

New design provides superior performance from servo-motor-controlled air door, improved case design and our exclusive electronic servo-actuated heater control valve. New 3-knob control operates temp, fan speed and heat/defrost balance. Includes universal defrost ducts. Also may be used with optional dash louvers.

Includes 3-knob control panel (knobs can be mounted directly into dash).

Electronic Servo Heater Control Valve included with kit.
Gen II Super - Heat and Cool
Part #: 61005-VUX-A
Price: $470.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Gen II Super - Heat and Cool
Amazing performance is achieved with the Gen II Super's "D" shaped air outlets. As an added benefit, you can position all 4 louvers wherever you need them in or under your dash. The Super is an ideal system for larger sedans and wagons. Features true bi-level operation for cooling and heating modes and a more-powerful dedicated dehumidified defroster.

61005, 68000, 66005 Gen II Systems Include:
Evaporator unit, mounting brackets, wiring harness, electronic servo heater control valve, duct hoses, drain kit. Defrost kit option includes ducts and hoses.

Controls are ordered separately

Under hood components such as compressor, brackets, condenser, hose kit, drier, and optional upgrades are ordered separately
Gen II Super - Heat, Cool and Defrost
Part #: 61005-VUZ-A
Price: $490.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Gen II Super - Heat, Cool and Defrost
Amazing performance is achieved with the Gen II Super's "D" shaped air outlets. As an added benefit, you can position all 4 louvers wherever you need them in or under your dash. The Super is an ideal system for larger sedans and wagons. Features true bi-level operation for cooling and heating modes and a more-powerful dedicated dehumidified defroster.

61005, 68000, 66005 Gen II Systems Include:
Evaporator unit, mounting brackets, wiring harness, electronic servo heater control valve, duct hoses, drain kit. Defrost kit option includes ducts and hoses.

Controls are ordered separately

Under hood components such as compressor, brackets, condenser, hose kit, drier, and optional upgrades are ordered separately
Vacuum Trunk Mount System - Heat and Cool
Part #: 63200-VUX-A
Price: $435.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Vacuum Trunk Mount System - Heat and Cool.

ANOTHER UNIQUE SOLUTION
When under-dash space is limited, this unit is for you. Installs easily and features four full- flow flex hoses with louvers to deliver cool air where you need it. Case is 12" deep.
Vacuum Trunk-Mount System, Cool Only
Part #: 63200-VUY-A
Price: $379.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Another unique solution! When under-dash space is limited, this unit is for you. Installs easily and features four full-flow flex hoses with louvers to deliver cool air where you need it. Case is 12-inches deep.
Gen II Mini - Heat and Cool
Part #: 66005-VUX-A
Price: $410.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Gen II Mini - Heat and Cool

Gen II technology is even incorporated into our smallest full feature heat & cool system. Exclusive CAD designed case delivers surprising capacity in an easy to fit package. The Gen II Mini is an ideal system for early model trucks and smaller hot rods.
Gen II Mini - Heat, Cool and Defrost
Part #: 66005-VUZ-A
Price: $470.00

Gen II technology is incorporated into our smallest full feature heat & cool system. Exclusive CAD-designed case delivers surprising capacity in an easy-to-fit package. The Gen II Mini is an ideal system for early model trucks and smaller hot rods.
Gen IV Magnum Evaporator Kit with Heat, Cool and Defrost
Part #: 671400-VUZ
Price: $699.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Our Gen IV technology delivers OEM-style climate control!

Enjoy true OEM-style bi-level, infinitely adjustable, comfort in your classic car.

The Gen IV Magnum system can handle even the largest sedan or wagon, and its unique shape allows fitment in vehicles with higher transmission tunnels and stepped firewalls, such as cars of the 1950s and later.
Mark IV - Under Dash, Cool-Only System
Part #: 672001-VHY
Price: $299.00

Mark IV - Under Dash, Cool-Only System

Vintage Air has created an exact reproduction of the most popular under dash air conditioner ever made. The Mark IV features an all steel case built from the original tooling. The timeless look of chrome and real steel combined with Vintage Airs proven performance makes the new Mark IV a great choice for your period-perfect ride. Includes mounting brackets and drain line.
Gen II ComPac - Heat and Cool
Part #: 68000-VUX-A
Price: $410.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Gen II ComPac - Heat and Cool

Our proven Gen II servo motor control technology makes this mid-sized package work better than many other's full-size systems! Three outlet vents allow you to position your louvers wherever you need them. The Gen II ComPac is an ideal system for coupes, classic trucks and smaller sedans.
Gen II ComPac - Heat, Cool and Defrost
Part #: 68000-VUZ-A
Price: $470.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Gen II ComPac - Heat, Cool and Defrost

Our proven Gen II servo motor control technology makes this mid-sized package work better than many other's full-size systems! Three outlet vents allow you to position your louvers wherever you need them. The Gen II ComPac is an ideal system for coupes, classic trucks and smaller sedans.
Monster Trunk Vacuum System - Cool Only
Part #: 685000-VUY
Price: $449.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Monster Trunk Vacuum System - Cool Only

BIG POWER OUT BACK!
This trunk-mounted system delivers more volume than our standard trunk system and is great for larger cars. Molded dual louvers mount to back seat package tray. Switch pod mounts under the dash. May be used as part of a dual air system too.
Heritage Under Dash - Cool Only - Brushed Aluminum Face
Part #: 674003
Price: $370.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Our all new, award winning, under-dash A/C systems were designed to deliver Vintage Air'™s proven performance while complementing almost every style of classic car or truck. These units are available in heat and cool, or cool only configurations and feature high-output blower fans and an electronic servo heater valve on heat & cool units. The Heritage is designed in a classic style that is perfect for customs, hot rods and classics. The four face material choices are: Real brushed aluminum, Mother of pearl nitrocellulose, Real engine-turned aluminum, and Black anodized, engine turned aluminum. The case is precision injection-molded for light weight and compact fitment. Just 16.25" wide x 5.25" Tall x 12" deep. Engine compressor and alternator brackets are available for most popular American V8 and 6 engines.
Heritage Under Dash - Cool Only - Black Anodized Engine Turned Aluminum Face
Part #: 674005
Price: $415.00

Our all new, award winning, under-dash A/C systems were designed to deliver Vintage Air'™s proven performance while complementing almost every style of classic car or truck. These units are available in heat and cool, or cool only configurations and feature high-output blower fans and an electronic servo heater valve on heat & cool units. The Heritage is designed in a classic style that is perfect for customs, hot rods and classics. The four face material choices are: Real brushed aluminum, Mother of pearl nitrocellulose, Real engine-turned aluminum, and Black anodized, engine turned aluminum. The case is precision injection-molded for light weight and compact fitment. Just 16.25" wide x 5.25" Tall x 12" deep. Engine compressor and alternator brackets are available for most popular American V8 and 6 engines.
Heritage Under Dash - Cool Only - Mother of Pearl Face
Part #: 674001
Price: $370.00

Our all new, award winning, under-dash A/C systems were designed to deliver Vintage Air'™s proven performance while complementing almost every style of classic car or truck. These units are available in heat and cool, or cool only configurations and feature high-output blower fans and an electronic servo heater valve on heat & cool units. The Heritage is designed in a classic style that is perfect for customs, hot rods and classics. The four face material choices are: Real brushed aluminum, Mother of pearl nitrocellulose, Real engine-turned aluminum, and Black anodized, engine turned aluminum. The case is precision injection-molded for light weight and compact fitment. Just 16.25" wide x 5.25" Tall x 12" deep. Engine compressor and alternator brackets are available for most popular American V8 and 6 engines.
Heritage Under Dash - Cool Only - Engine Turned Aluminum Face
Part #: 674002
Price: $400.00

Our all new, award winning, under-dash A/C systems were designed to deliver Vintage Air'™s proven performance while complementing almost every style of classic car or truck. These units are available in heat and cool, or cool only configurations and feature high-output blower fans and an electronic servo heater valve on heat & cool units. The Heritage is designed in a classic style that is perfect for customs, hot rods and classics. The four face material choices are: Real brushed aluminum, Mother of pearl nitrocellulose, Real engine-turned aluminum, and Black anodized, engine turned aluminum. The case is precision injection-molded for light weight and compact fitment. Just 16.25" wide x 5.25" Tall x 12" deep. Engine compressor and alternator brackets are available for most popular American V8 and 6 engines.
Heritage Under Dash - Heat & Cool - Mother of Pearl Face
Part #: 674011
Price: $400.00

Our all new, award winning, under-dash A/C systems were designed to deliver Vintage Air'™s proven performance while complementing almost every style of classic car or truck. These units are available in heat and cool, or cool only configurations and feature high-output blower fans and an electronic servo heater valve on heat & cool units. The Heritage is designed in a classic style that is perfect for customs, hot rods and classics. The four face material choices are: Real brushed aluminum, Mother of pearl nitrocellulose, Real engine-turned aluminum, and Black anodized, engine turned aluminum. The case is precision injection-molded for light weight and compact fitment. Just 16.25" wide x 5.25" Tall x 12" deep. Engine compressor and alternator brackets are available for most popular American V8 and 6 engines.
Heritage Under Dash - Heat & Cool - Engine Turned Aluminum Face
Part #: 674012
Price: $430.00

Our all new, award winning, under-dash A/C systems were designed to deliver Vintage Air'™s proven performance while complementing almost every style of classic car or truck. These units are available in heat and cool, or cool only configurations and feature high-output blower fans and an electronic servo heater valve on heat & cool units. The Heritage is designed in a classic style that is perfect for customs, hot rods and classics. The four face material choices are: Real brushed aluminum, Mother of pearl nitrocellulose, Real engine-turned aluminum, and Black anodized, engine turned aluminum. The case is precision injection-molded for light weight and compact fitment. Just 16.25" wide x 5.25" Tall x 12" deep. Engine compressor and alternator brackets are available for most popular American V8 and 6 engines.
Heritage Under Dash - Heat & Cool - Brushed Aluminum Face
Part #: 674013
Price: $400.00

Our all new, award winning, under-dash A/C systems were designed to deliver Vintage Air'™s proven performance while complementing almost every style of classic car or truck. These units are available in heat and cool, or cool only configurations and feature high-output blower fans and an electronic servo heater valve on heat & cool units. The Heritage is designed in a classic style that is perfect for customs, hot rods and classics. The four face material choices are: Real brushed aluminum, Mother of pearl nitrocellulose, Real engine-turned aluminum, and Black anodized, engine turned aluminum. The case is precision injection-molded for light weight and compact fitment. Just 16.25" wide x 5.25" Tall x 12" deep. Engine compressor and alternator brackets are available for most popular American V8 and 6 engines.
Heritage Under Dash - Heat & Cool - Black Anodized Engine Turned Aluminum Face
Part #: 674014
Price: $445.00

Our all new, award winning, under-dash A/C systems were designed to deliver Vintage Air'™s proven performance while complementing almost every style of classic car or truck. These units are available in heat and cool, or cool only configurations and feature high-output blower fans and an electronic servo heater valve on heat & cool units. The Heritage is designed in a classic style that is perfect for customs, hot rods and classics. The four face material choices are: Real brushed aluminum, Mother of pearl nitrocellulose, Real engine-turned aluminum, and Black anodized, engine turned aluminum. The case is precision injection-molded for light weight and compact fitment. Just 16.25" wide x 5.25" Tall x 12" deep. Engine compressor and alternator brackets are available for most popular American V8 and 6 engines.
Gen IV Magnum Mock-Up Unit
Part #: 671450
Price: $59.95

 DOWNLOAD INSTALLATION INSTRUCTIONS

This lightweight mock-up shell makes fitment and positioning easier. The unit comes with jack nuts in place, and brackets as shown.
Optional Universal Components
Gen II Streamline ProLine™ Oval Control Panel with Black Anodized Finish
Part #: 481005
Price: $169.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This Gen II control panel features the same styling and dimensions as the original Vintage Air design! With a black anodized finish with machined accents, the panel is internally lighted through the soft-glow aluminum knobs, and it delivers infinite louver air temperature regulation and bi-level operation of A/C and heat.

With simple plug-in connections, no vacuum lines, and fewer wires to route, the panel operates our exclusive servo-actuated heater valve which allows the introduction of small amounts of heat to regulate air temperature.

Dimensions are 5.5-inches wide x 2.5-inches tall x 2.625-inches deep.
Gen II Vertical 4-Lever Machined-Face Upgrade Control Panel
Part #: 48102-SVQ
Price: $129.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined-face upgrade control panel is internally lighted and delivers infinite louver air temperature regulation and bi-level operation of A/C and heat.

With simple plug-in connections, no vacuum lines, and fewer wires to route, the panel operates our exclusive servo-actuated heater valve which allows the introduction of small amounts of heat to regulate air temperature.

Dimensions are 2.5-inches wide x 4.69-inches tall x 2.625-inches deep.
Gen II Horizontal 4-Lever Machined-Face Upgrade Control Panel
Part #: 48103-SHQ
Price: $129.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined-face upgrade control panel is internally lighted and delivers infinite louver air temperature regulation and bi-level operation of A/C and heat.

With simple plug-in connections, no vacuum lines, and fewer wires to route, the panel operates our exclusive servo-actuated heater valve which allows the introduction of small amounts of heat to regulate air temperature.

Dimensions are 4.69-inches wide x 2.5-inches tall x 2.625-inches deep.
Gen II Streamline ProLine™ Oval Control Panel with Polished Finish
Part #: 48104-RHQ
Price: $159.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This Gen II control panel features the same styling and dimensions as the original Vintage Air design! The panel is internally lighted through the soft-glow aluminum knobs, and it delivers infinite louver air temperature regulation and bi-level operation of A/C and heat.

With simple plug-in connections, no vacuum lines, and fewer wires to route, the panel operates our exclusive servo-actuated heater valve which allows the introduction of small amounts of heat to regulate air temperature.

Dimensions are 5.5-inches wide x 2.5-inches tall x 2.625-inches deep.
Base Model Horizontal 4-Lever Gen II Fingertip Control Panel
Part #: 49110-SHQ
Price: $75.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This internally lighted standard machined control panel with a mylar face delivers infinite louver air temperature regulation and bi-level operation of A/C and heat.

With simple plug-in connections, no vacuum lines, and fewer wires to route, the panel operates our exclusive servo-actuated heater valve which allows the introduction of small amounts of heat to regulate air temperature.

Dimensions are 4.63-inches wide x 2.44-inches tall x 2.625-inches deep.
Gen II Streamline 4-Knob Control Panel with Polished Finish
Part #: 491200-RUA
Price: $159.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This control panel is designed to fit into very compact dash or console positions. The panel is internally lighted through the soft-glow aluminum knobs, and it delivers infinite louver air temperature regulation and bi-level operation of A/C and heat.

With simple plug-in connections, no vacuum lines, and fewer wires to route, the panel operates our exclusive servo-actuated heater valve which allows the introduction of small amounts of heat to regulate air temperature.

Dimensions are 5.318-inches wide x 1 inch tall x 2.625-inches deep.
ProLine™ Brushed Aluminum Control Panel for Vacuum-Controlled Systems
Part #: 49120-VUQ
Price: $129.00

This brushed aluminum control panel is a great upgrade option for Vintage Air vacuum-controlled systems.

The panel is internally lighted, and its dimensions measure 4.5-inches wide x 2-inches tall.
Upgrade 3-Knob Gen IV ProLine™ Oval Horizontal Control Panel with Polished Face and Knobs
Part #: 491210-RUA
Price: $199.00

This machined aluminum rotary control panel features a polished face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 4.125-inches x 1.25-inches x 1.25-inches deep, and is also available in black-anodized satin finish.
Upgrade 3-Knob Gen IV ProLine™ Oval Vertical Control Panel with Polished Face and Knobs
Part #: 491214-RVA
Price: $199.00

This machined aluminum rotary control panel features a polished face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 1.25-inches x 4.125-inches x 1.25-inches deep, and is also available in black-anodized satin finish.
Upgrade 3-Knob Gen IV ProLine™ Oval Vertical Control Panel with Black Anodized Face and Knobs
Part #: 491226-RVA
Price: $209.00

This machined aluminum rotary control panel features a black-anodized face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 1.25-inches x 4.125-inches x 1.25-inches deep, and is also available with a polished finish.
Gen II Streamline 4-Knob Control Panel with Black Anodized Finish
Part #: 491229
Price: $169.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This control panel is designed to fit into very compact dash or console positions. The panel is internally lighted through the soft-glow aluminum knobs, and it delivers infinite louver air temperature regulation and bi-level operation of A/C and heat.

With simple plug-in connections, no vacuum lines, and fewer wires to route, the panel operates our exclusive servo-actuated heater valve which allows the introduction of small amounts of heat to regulate air temperature.

Dimensions are 5.318-inches wide x 1 inch tall x 2.625-inches deep.
Upgrade 3-Lever Gen IV ProLine™ Rectangular Control Panel with Polished Bezel and Knobs
Part #: 491230
Price: $199.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined aluminum slide control panel features a polished bezel and knobs with a matte finish mylar face. Also available in black-anodized satin finish.

Panel includes mylar face for horizontal and vertical configurations, as well as our exclusive variable soft-white LED illumination.

Panel measures 4.30-inches x 2.17-inches.
Gen II 4-Knob Base Under-Dash Control Panel
Part #: 49200-RHA
Price: $50.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This control panel delivers infinite louver air temperature regulation and bi-level operation of A/C and heat.

With simple plug-in connections, no vacuum lines, and fewer wires to route, the panel operates our exclusive servo-actuated heater valve which allows the introduction of small amounts of heat to regulate air temperature.

The control switches can also be used directly in your dash without the pod for a truly customized look.

Dimensions are 7.125-inches wide x 1.875-inches tall x 2.625-inches deep.
Gen IV 3-Knob Base Under-Dash Control Panel
Part #: 492050
Price: $49.95

 DOWNLOAD INSTALLATION INSTRUCTIONS

This super compact, easy-to-mount, 3-knob control panel delivers valuable control at your fingertips. The individual switches can be removed from the pod and mounted directly into your dash for increased design options and flexibility.

Pod measures 5.25-inches x 1.25-inches.
Gen II 4-Knob Base Under-Dash Control Panel with Louver
Part #: 49205-RHA
Price: $60.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This control panel delivers infinite louver air temperature regulation and bi-level operation of A/C and heat.

With simple plug-in connections, no vacuum lines, and fewer wires to route, the panel operates our exclusive servo-actuated heater valve which allows the introduction of small amounts of heat to regulate air temperature.

Dimensions are 12-inches wide x 2.375-inches tall x 2.625-inches deep.
Streamline ProLine™ Oval Control Panel for Vacuum-Controlled Systems
Part #: 49500-VSQ
Price: $159.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This stylish control panel features a polished face and is a great upgrade option for Vintage Air vacuum-controlled systems.

The panel is internally lighted through the soft-glow aluminum knobs, and its dimensions measure 5.5-inches wide x 2.5-inches tall.
Servo Heater Valve Re-fit Kit with Control Knob and Pod
Part #: 50507-VUA
Price: $89.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

Servo Heater Valve Re-fit Kit with Control Knob and Pod

Now you can retrofit your current Vintage Air A/C or heater system with our Gen II style adjustable electronic servo-controlled heater water valve kit. Includes servo valve, control switch and wiring kit.
Gen II Super 180 deg duct adapter for Super center vent
Part #: 605004-VUA
Price: $15.95

 DOWNLOAD INSTALLATION INSTRUCTIONS

Gen II Super 180 deg duct adapter for Super center vent. Turns air flow down for under-dash louver use.
Gen II ComPac and Mini 180 deg duct adapter for center vent
Part #: 60500-VUA
Price: $15.95

 DOWNLOAD INSTALLATION INSTRUCTIONS

Gen II ComPac and Mini 180 deg duct adapter for center vent. Turns air flow down for under-dash louver use.
Gen II ComPac and Mini smooth diverter duct
Part #: 623000-VUA
Price: $12.95

 DOWNLOAD INSTALLATION INSTRUCTIONS

Gen II ComPac and Mini smooth diverter duct directs heater air to left side of car when evaporator is mounted to extreme right side. Accepts 2" hose.
Gen II ComPac and Mini duct extension
Part #: 623010-VUA
Price: $29.95

 DOWNLOAD INSTALLATION INSTRUCTIONS

Gen II ComPac and Mini duct extension.
Gen II Super Smooth diverter duct
Part #: 623013-VUA
Price: $12.95

 DOWNLOAD INSTALLATION INSTRUCTIONS

Gen II Super Smooth diverter duct for Super directs heater air to left side of car when evaporator is mounted to extreme right side. Accepts 2" hose.
Gen IV ProLine™ Ellipse Control Panel with Polished Finish
Part #: 491240
Price: $199.00

Taking a design theme from the extremely popular oval Streamline Gen II control panel, the new Ellipse control panel provides a fresh new option for the Gen IV Magnum line of climate systems. The Ellipse panel provides a stylish and easy way to control all electronic features found in the Gen IV product line.
Gen IV ProLine™ Ellipse Control Panel with Black Anodized Finish
Part #: 491241
Price: $209.00

Taking a design theme from the extremely popular oval Streamline Gen II control panel, the new Ellipse control panel provides a fresh new option for the Gen IV Magnum line of climate systems. The Ellipse panel provides a stylish and easy way to control all electronic features found in the Gen IV product line.
Upgrade 3-Lever Gen IV ProLine™ Rectangular Control Panel with Black Anodized Bezel and Knobs
Part #: 491231
Price: $209.00

This machined aluminum slide control panel features a black-anodized bezel and knobs with a satin finish mylar face. Also available in polished matte finish.

Panel includes mylar face for horizontal and vertical configurations, as well as our exclusive variable soft-white LED illumination.

Panel measures 4.30-inches x 2.17-inches.
Base Model Vertical 4-Lever Gen II Fingertip Control Panel
Part #: 49110-SVQ
Price: $75.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This internally lighted standard machined control panel with a mylar face delivers infinite louver air temperature regulation and bi-level operation of A/C and heat.

With simple plug-in connections, no vacuum lines, and fewer wires to route, the panel operates our exclusive servo-actuated heater valve which allows the introduction of small amounts of heat to regulate air temperature.

Dimensions are 2.44-inches wide x 4.63-inches tall x 2.625-inches deep.
Gen II Streamline ProLine™ Oval Control Panel with Phantom Black Finish
Part #: 481006
Price: $169.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This Gen II control panel features the same styling and dimensions as the original Vintage Air design! With a phantom black (all black anodized) finish, the panel is internally lighted through the soft-glow aluminum knobs, and it delivers infinite louver air temperature regulation and bi-level operation of A/C and heat.

With simple plug-in connections, no vacuum lines, and fewer wires to route, the panel operates our exclusive servo-actuated heater valve which allows the introduction of small amounts of heat to regulate air temperature.

Dimensions are 5.5-inches wide x 2.5-inches tall x 2.625-inches deep.
Upgrade 3-Knob Gen IV ProLine™ Oval Horizontal Control Panel with Black Anodized Face and Knobs
Part #: 491223-RUA
Price: $209.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined aluminum rotary control panel features a black-anodized face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 4.125-inches x 1.25-inches x 1.25-inches deep, and is also available with a polished finish.
Upgrade 3-Knob Gen IV ProLine™ Oval Horizontal Control Panel with Black Anodized Face and Knobs
Part #: 491223-RUA
Price: $209.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined aluminum rotary control panel features a black-anodized face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 4.125-inches x 1.25-inches x 1.25-inches deep, and is also available with a polished finish.
Upgrade 3-Knob Gen IV ProLine™ Oval Horizontal Control Panel with Black Anodized Face and Knobs
Part #: 491223-RUA
Price: $209.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined aluminum rotary control panel features a black-anodized face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 4.125-inches x 1.25-inches x 1.25-inches deep, and is also available with a polished finish.
Upgrade 3-Knob Gen IV ProLine™ Oval Horizontal Control Panel with Black Anodized Face and Knobs
Part #: 491223-RUA
Price: $209.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined aluminum rotary control panel features a black-anodized face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 4.125-inches x 1.25-inches x 1.25-inches deep, and is also available with a polished finish.
Upgrade 3-Knob Gen IV ProLine™ Oval Horizontal Control Panel with Black Anodized Face and Knobs
Part #: 491223-RUA
Price: $209.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined aluminum rotary control panel features a black-anodized face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 4.125-inches x 1.25-inches x 1.25-inches deep, and is also available with a polished finish.
Upgrade 3-Knob Gen IV ProLine™ Oval Horizontal Control Panel with Black Anodized Face and Knobs
Part #: 491223-RUA
Price: $209.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined aluminum rotary control panel features a black-anodized face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 4.125-inches x 1.25-inches x 1.25-inches deep, and is also available with a polished finish.
Upgrade 3-Knob Gen IV ProLine™ Oval Horizontal Control Panel with Black Anodized Face and Knobs
Part #: 491223-RUA
Price: $209.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined aluminum rotary control panel features a black-anodized face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 4.125-inches x 1.25-inches x 1.25-inches deep, and is also available with a polished finish.
Upgrade 3-Knob Gen IV ProLine™ Oval Horizontal Control Panel with Black Anodized Face and Knobs
Part #: 491223-RUA
Price: $209.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined aluminum rotary control panel features a black-anodized face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 4.125-inches x 1.25-inches x 1.25-inches deep, and is also available with a polished finish.
Upgrade 3-Knob Gen IV ProLine™ Oval Horizontal Control Panel with Black Anodized Face and Knobs
Part #: 491223-RUA
Price: $209.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined aluminum rotary control panel features a black-anodized face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 4.125-inches x 1.25-inches x 1.25-inches deep, and is also available with a polished finish.
Upgrade 3-Knob Gen IV ProLine™ Oval Horizontal Control Panel with Black Anodized Face and Knobs
Part #: 491223-RUA
Price: $209.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined aluminum rotary control panel features a black-anodized face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 4.125-inches x 1.25-inches x 1.25-inches deep, and is also available with a polished finish.
Upgrade 3-Knob Gen IV ProLine™ Oval Horizontal Control Panel with Black Anodized Face and Knobs
Part #: 491223-RUA
Price: $209.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined aluminum rotary control panel features a black-anodized face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 4.125-inches x 1.25-inches x 1.25-inches deep, and is also available with a polished finish.
Upgrade 3-Knob Gen IV ProLine™ Oval Horizontal Control Panel with Black Anodized Face and Knobs
Part #: 491223-RUA
Price: $209.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined aluminum rotary control panel features a black-anodized face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 4.125-inches x 1.25-inches x 1.25-inches deep, and is also available with a polished finish.
Upgrade 3-Knob Gen IV ProLine™ Oval Horizontal Control Panel with Black Anodized Face and Knobs
Part #: 491223-RUA
Price: $209.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined aluminum rotary control panel features a black-anodized face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 4.125-inches x 1.25-inches x 1.25-inches deep, and is also available with a polished finish.
Upgrade 3-Knob Gen IV ProLine™ Oval Horizontal Control Panel with Black Anodized Face and Knobs
Part #: 491223-RUA
Price: $209.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined aluminum rotary control panel features a black-anodized face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 4.125-inches x 1.25-inches x 1.25-inches deep, and is also available with a polished finish.
Upgrade 3-Knob Gen IV ProLine™ Oval Horizontal Control Panel with Black Anodized Face and Knobs
Part #: 491223-RUA
Price: $209.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined aluminum rotary control panel features a black-anodized face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 4.125-inches x 1.25-inches x 1.25-inches deep, and is also available with a polished finish.
Upgrade 3-Knob Gen IV ProLine™ Oval Horizontal Control Panel with Black Anodized Face and Knobs
Part #: 491223-RUA
Price: $209.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This machined aluminum rotary control panel features a black-anodized face and knobs with engraved icons, and includes our exclusive soft-white LED lighting in each knob.

The panel measures 4.125-inches x 1.25-inches x 1.25-inches deep, and is also available with a polished finish.