System Features
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite just-right-temperature air blending
- Infinite blower fan speed adjustment
- High-volume dehumidified defrost mode
- Separate high-capacity aluminum plate & fin cooling coil
- Copper/brass CuproBraze™ parallel-flow heater coil
- Mounts behind the dash
- Uses your factory system controls with our patented Electronic Cable Converters
- Flat steel firewall cover panel
- Replacement molded glove box (reduced capacity)
NOTES:
- NOTES:
1. This kit requires an OEM, deluxe 4-lever control panel (Not included).
2. This kit is designed for the original firewall and dash.
3. This kit includes TiteFit™ refrigerant lines that are routed through the core support, with the drier mounting behind. The kit may be upgraded to include our polished TiteFit™ lines and our popular polished ProLine compressor/alternator bracket.
4. If using a cross flow radiator, see Condenser Kit # 03455-VCC.
5. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
6. When retaining the original 265 or 283 V8 engine, it may be necessary to upgrade the harmonic balancer and pulleys. You will also need to upgrade from the generator to an alternator.
7. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
WARNING: California proposition 65
1955 Nomad Gen IV SureFit Complete Kits, Evaporator Kits, Condenser Kits, Control Panel Kits and Hose Kits
1955-56 Chevrolet Full-Size Gen IV SureFit™ Complete Kit with Center Vent Plenum
96155-PCU
$1,925.00
The Gen IV is Vintage Air's most powerful and inte...
Qty.
1955-56 Chevrolet Full-Size Gen IV SureFit™ Complete Kit with 4-Vent Plenum
96156-PCU
$1,925.00
The Gen IV is Vintage Air's most powerful and inte...
Qty.
1955-56 Chevrolet Full-Size Gen IV SureFit™ Evaporator Kit with Center Vent Plenum
56155-PCZ
$1,100.00
The Gen IV is Vintage Air's most powerful and inte...
Qty.
1955-56 Chevrolet Full-Size Gen IV SureFit™ Evaporator Kit with 4-Vent Plenum
56156-PCZ
$1,100.00
The Gen IV is Vintage Air's most powerful and inte...
Qty.
1955-56 Chevrolet Full-Size Gen IV SureFit™ Condenser Kit with Drier V8 Position
03257-VCC-A
$315.00
This SureFit™ condenser kit has been custom desi...
Qty.
1955-56 Chevrolet Full-Size Gen IV SureFit™ Condenser Kit with Drier 6-Cylinder Position
03357-VCC-A
$315.00
This SureFit™ condenser kit has been custom desi...
Qty.
1955-56 Chevrolet Full-Size Gen IV SureFit™ Standard Hose Kit
52156-PCA
$175.00
This standard hose kit is designed specifically fo...
Qty.
1955-56 Chevrolet Full-Size Gen IV SureFit™ Modified Hose Kit V8
52656-PCA
$175.00
This modified hose kit is designed for use with a ...
Qty.
1955-56 Chevrolet Full-Size Gen IV SureFit™ Modified Hose Kit 6-Cylinder
526580-PCA
$175.00
This modified hose kit is designed for use with a ...
Qty.
Optional System Components
1955-57 Chevrolet Full-Size Condenser For Cross Flow Radiator
Price: $255.00
Price: $255.00
03455-VCC
DOWNLOAD INSTALLATION INSTRUCTIONS
SuperFlow condenser kit for use with many aftermarket 1955-57 Chevrolet Full-Size crossflow aluminum radiators (Universal fit with other cross flow radiator packages).
Compatible with SPAL Electric Fan Package 32007-VUF.
Compatible with SPAL Electric Fan Package 32007-VUF.
Monster 1955-57 Chevrolet CustomFit Brushless Tri-5 Fan Kit
Price: $650.00
Price: $650.00
280479
DOWNLOAD INSTALLATION INSTRUCTIONS
Vintage Air Monster Brushless fan and shroud combination 850 Watt 19" fan kit.
Brushless electric fan with custom shroud and powder coated tubular mounting bracket (see diagram for dimensions and clearance requirements). Includes heavy-duty 6-gauge power harness wiring kit 231088 (as shown) with 100 amp MIDI-fuse assembly.
- 850 Watt Brushless Motor
- 19" Fan
- Laser cut powder coated bracket and frame
- 6-gauge power harness kit with MIDI-Fuse assembly
- Requires control harness (available separately based on engine thermostat temperature customer plans to use (or aftermarket engine controller).
- Based on Walker radiator (21-7/8" x 17-9/16")
Brushless electric fan with custom shroud and powder coated tubular mounting bracket (see diagram for dimensions and clearance requirements). Includes heavy-duty 6-gauge power harness wiring kit 231088 (as shown) with 100 amp MIDI-fuse assembly.
- 850 Watt Brushless Motor
- 19" Fan
- Laser cut powder coated bracket and frame
- 6-gauge power harness kit with MIDI-Fuse assembly
- Requires control harness (available separately based on engine thermostat temperature customer plans to use (or aftermarket engine controller).
- Based on Walker radiator (21-7/8" x 17-9/16")
1955-57 Chevrolet Full-Size SPAL Electric Fan Package with Mounts
Price: $219.00
Price: $219.00
32007-VUF
DOWNLOAD INSTALLATION INSTRUCTIONS
Optional fan package designed for use with a SuperFlow condenser. V8 core support position only (1955).
1955-57 Chevrolet Full-Size Fan Shroud V8 with 6-Cylinder Core Support
Price: $150.00
Price: $150.00
32057-VCF
DOWNLOAD INSTALLATION INSTRUCTIONS
This is a direct replacement fan shroud for your classic Chevy.
We also recommend using our 18-inch heavy-duty fan blade (32918-VUF).
We also recommend using our 18-inch heavy-duty fan blade (32918-VUF).
1955-57 Chevrolet Full-Size Dual Cool™ Fan Package
Price: $435.00
Price: $435.00
371255
DOWNLOAD INSTALLATION INSTRUCTIONS
This dual electric fan kit is designed to fit 1955-57 Chevrolet Full-Size models with a 6-cylinder core support position.
1955-57 Chevrolet Full-Size V8 Fan Shroud
Price: $150.00
Price: $150.00
37155-VCF
DOWNLOAD INSTALLATION INSTRUCTIONS
This is a direct replacement fan shroud for your classic Chevy.
We also recommend using our 18-inch heavy-duty fan blade (32918-VUF).
We also recommend using our 18-inch heavy-duty fan blade (32918-VUF).
1955-57 Chevrolet Full-Size Fan Shroud V8 with Radiator Moved to 6-Cylinder Position
Price: $150.00
Price: $150.00
375555-ACR
DOWNLOAD INSTALLATION INSTRUCTIONS
This is a direct replacement fan shroud for your classic Chevy.
We also recommend using our 18-inch heavy-duty fan blade (32918-VUF).
We also recommend using our 18-inch heavy-duty fan blade (32918-VUF).
1955-57 Chevrolet Full-Size ProLine Brushed Aluminum Louver Bezel (Pair)
Price: N/A
Price: N/A
492055
DOWNLOAD INSTALLATION INSTRUCTIONS
Fits 1955-57 Chevrolet Full-Size models. Louvers are not included. Fits most standard and ProLine round louvers.
1955-57 Chevrolet Full-Size ProLine Chrome Louver Assembly (Pair)
Price: $200.00
Price: $200.00
492056
DOWNLOAD INSTALLATION INSTRUCTIONS
Fits 1955-57 Chevrolet Full-Size models. Louvers are included.