Vintage Air University

1

Bright Small Block Ford Front RunnerTM Drive System
(Polished Front Cover/Bracket with Polished Compressor and Alternator, Chrome Pulleys, Polished Clutch and Tensioner Covers)
174100 With Power Steering (includes pump)
174103-SFA With Power Steering (less power steering pump)
175103-SFA Non-Power Steering

 

Bright And Chrome Small Block Ford Front RunnerTM Drive System
(Polished Front Cover/Bracket with Chrome Compressor and Alternator, Chrome Pulleys, Clutch and Tensioner Covers)
176017 With Power Steering (includes pump)
176018 With Power Steering (less power steering pump)
176019 Non-Power Steering

 

Black Small Block Ford Front RunnerTM Drive System
(Natural Finish Front Cover/Bracket with Natural Finish Compressor and Alternator, Black Hardcoat Pulleys, Black Anodized Clutch and Tensioner Covers)
174101 With Power Steering (includes pump)
174102-SFA With Power Steering (less power steering pump)
175102-SFA Non-Power Steering

 

Black And Chrome Small Block Ford Front RunnerTM Drive System
(Natural Finish Front Cover/Bracket with Chrome Compressor and Alternator, Black Hardcoat Pulleys, Black Anodized Clutch and Tensioner Covers)
176020 With Power Steering (includes pump)
176021 With Power Steering (less power steering pump)
176022 Non-Power Steering

 

2

The Original High-Performance Engine Drive Systems
Small Block Ford Front Runner Drive System Includes:
– Patented One-Piece Forged Aluminum Timing Cover with Integral Accessory Mounts
– ARP Stainless 12 Point Bolt and Hardware Kit
– Sanden SD-7B10 Compressor With Formed Aluminum Hardlines (Exit Passenger Side)
– 170 Amp Single Wire “Hairpin” Internal Fan Alternator
– Dayco OEM Tensioner
– Timing Cover Gasket Set
– Dayco Perf Serpentine Drive Belt
– Delphi-Saginaw Power Steering Pump With Integral Reservoir
– Compressor Clutch Cover
– Tensioner Cover Kit
– 4 Bolt Crankshaft Pulley
– Stewart Hi-Perf Aluminum Water Pump
– Water Pump Pulley
– Power Steering Pump Pulley (If Power Steering System)

1. Requires electric fuel pump.
2. Requires 4-bolt harmonic balancer. If using Ford 6.573” diameter Motorsports balancer, spacer #199002-HFA is required.
3. If using front sump oil pan, must purchase Stainless Steel Dipstick Kit shown at left – (sold separately).

 

3
Patented Machined Front Cover Forging!
This unique design provides the most rigid and advanced accessory drive system ever produced for Ford small block engines. Front cover and mounting brackets in one super strong component.

4
Use Ford Timing Pointer # F1TZ6023A

NEXT: FRONT RUNNER Engine Accessory Drive – Ford Coyote 5.0L (6)