Vintage Air University
Lizard Skin recommends covering the entire interior first with their sound control product, followed by a layer of the ceramic heat insulation product for maximum results. See manufacturer’s recommendations for proper MIL thickness on all products. Lizard Skin products spray on easily over your bare metal floor, doors and roof, with their low-pressure spray gun kit listed below.
202006 One-gallon tub of ceramic heat insulation product
202007 Two-gallon tub of ceramic heat insulation product
202008 One-gallon tub of sound control product
202009 Two-gallon tub of sound control product
202010 Spray gun kit with stir paddle
202011 4” foam roller
202012 Project kit: Includes two gallon ceramic heat control, two gallons sound control and complete gun applicator kit
Widely used by NASCAR teams, this material is easy to install, very flexible and follows the contours of your floor and firewall. KoolMat is a closed cell fiberglass material cured to a silicon top layer. The white fiberglass bottom layer reflects heat up to 1200 degrees. The layers are fused together at 1000 degrees which assures no breakdown from extreme exhaust system heat. Weather and mildew resistant, KoolMat delivers a 23-decibel reduction in sound transfer inside the car when properly installed. Will not crack, dry out or wear like other foil-faced products. KoolMat is sold by the foot in 30”-wide rolls. Order by part number and specify the number of feet you need.
202001-IUR 30” wide KoolMat sold per running foot
Thermo-Shield
Radiant and conductive heat in the underhood environment can destroy hoses and wiring by drying out or melting the rubber and plastic components. Thermo-Shield aluminized adhesive-backed tape is great for wrapping the hoses and wires you don’t want to remove for insulating. Thermo-Shield reflects radiant heat up to 2000°F.
209107
1-1/2” wide x 15 foot roll
Thermo-Sleeve
Thermo-Sleeve is a combination of high temperature fabric laminated to a highly reflective Mylar foil. It provides protection for hoses and wires from radiant heat. Thermo-Sleeve’s ultra-lightweight construction provides more insulation than traditional bulky rubber-coated fiberglass and reflects more than 90% of radiant heat. It is fireproof and oil resistant.
209105
1-1/8” – 1-1/2” diameter x 3 foot
209106
1-5/8” – 2” diameter x 3 foot
Clamp-On Heat Shield
These flexible shields block more than 90% of damaging radiant heat from exhaust. The high-tech composite construction provides the ultimate in protection, incorporating T-C-T, Thermo Tec’s proprietary coating technology. Clamp-On Shields are available in 1’, 2’ and 3’ lengths for automotive and motorcycle applications. Kits come complete with all clamps and install in minutes.
209100
6 in. x 1 foot Kit
209101
6 in. x 2 foot Kit
209102
6 in. x 3foot kit
209103
4 in. x 1 foot kit
209104
4 in. x 2 foot kit