SureFit Series

FOR SureFit Series Please

Vintage Air SureFit kits are the most complete, bolt-in climate control systems available for classic and late model muscle cars, restomods, and trucks. SureFit kits install easily and utilize most of the factory sheet metal and body features, and are engineered as "vehicle specific" complete systems. With the ever-increasing value of classic cars and trucks, particularly Corvettes, "pony cars," and muscle cars of the '60s, we have engineered these kits to be installed using as many of the factory-drilled holes and brackets as possible to maintain the vehicle's value. In some cases, very minor adjustments or an extra hole may be required. This is because all auto manufacturers made changes to their vehicle assembly designs during production runs. SureFit kits also offer the most complete and straightforward installations available anywhere. Our award-winning instruction booklets and carefully engineered system packages should make your SureFit installation job simple, fun and very cool!

Our SureFit kits are designed to place the evaporator case and air duct hoses behind the dash for a factory-clean look. In most cases, the SureFit system will be controlled by your stock dash controls using our exclusive patented "Cable Converters." In some applications, a new "factory" look control panel is included with the kit. Some early truck kits must use additional switches.

All SureFit systems provide full OEM-style operations including air conditioning, floor or vent exit heating and a powerful dehumidified defroster. To retain a true factory look, the A/C air exits through the factory dash louvers, if originally equipped in your car's dash.

Sort by:
1964-65 Chevelle without Factory Air Gen IV SureFit™ Evaporator Kit
Part #: 561065
Starting at N/A

 DOWNLOAD INSTALLATION INSTRUCTIONS

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

**Evaporator kit includes the evaporator unit and mounting brackets louvers (where required) duct hose wiring harness our patented Electronic Cable Converters hardware and installation instructions.
1964-65 Chevelle with Factory Air Gen IV SureFit™ Evaporator Kit
Part #: 564464
Starting at N/A

 DOWNLOAD INSTALLATION INSTRUCTIONS

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

**Evaporator kit includes the evaporator unit and mounting brackets louvers (where required) duct hose wiring harness our patented Electronic Cable Converters hardware and installation instructions.
1964-65 Chevelle without Factory Air Gen IV SureFit™ Complete Kit
Part #: 961065
Starting at N/A

 DOWNLOAD INSTALLATION INSTRUCTIONS

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

**Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.
1964-65 Chevelle with Factory Air Gen IV SureFit™ Complete Kit
Part #: 964464
Starting at N/A

 DOWNLOAD INSTALLATION INSTRUCTIONS

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

**Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.
1964-67 Chevelle Gen IV SureFit™ Condenser Kit with Drier
Part #: 021166
Starting at N/A

 DOWNLOAD INSTALLATION INSTRUCTIONS

This SureFit™ condenser kit has been custom designed by our engineering team to mount directly into your vehicle. In addition to the parallel-flow condenser the kit includes a receiver/drier binary safety switch and all of the necessary hardlines and hardware for mounting into a stock configured engine compartment and core support. Detailed installation instructions are also included.
1955-56 Chevy Cars Upgrade Control Panel Kit
Part #: 473104
Starting at $299.99

 DOWNLOAD INSTALLATION INSTRUCTIONS

Bolt-in replacement control panel designed for 1955-56 Chevy passenger car Gen IV and Gen 5 SureFit systems. Features include blue LED "A/C on" indicator and variable slide adjustments for fan speed, temperature, and air delivery selection. Machined from 6061-T6 billet aluminum, then triple-chrome plated with laser etched lettering. Includes hardware to install in OEM dash location, wiring harness and complete installation instructions.
1986-87 Grand National with Factory Air Gen IV SureFit™ Complete Kit
Part #: 965085
Starting at $2,195.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

**Complete kits include everything in the evaporator kit, plus all under-hood components such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware and installation instructions.

This complete kit was designed for the 1986-87 Regal Grand National with factory air. Some of the kits listed will fit other years and trims such as the T-type, Sport Coupe, etc.

• The Evaporator kit can be utilized for all Regal trims. The new electronic control panel will fit all Regal trims as well and is included in the Evaporator kit.
• There are two options for the Condenser Kit (Turbo and Non-Turbo). If your compressor is mounted on the driver’s side of the vehicle, use the Turbo Condenser kit. If the compressor is located on the Passenger’s side of the vehicle, use the Non-Turbo Condenser kit option.
• There are two Hose kit options, the Standard hose kit and the Modified hose kit. The Standard hose kit will only fit 1986-87 Grand National and T-type. The hose lengths and fittings are specific for these years and trim. For other trims, use the Modified hose kit, which will allow the A/C hoses to be cut to length and fittings to be clocked to your needs.
• At this time, there is only one compressor bracket kit available for the Buick Regal, which is designed to only fit the 1986-87 Grand National and T-type. This bracket kit was designed using a 7B10 compressor. This compact compressor was used due to the tight clearance in the engine bay.
1982-87 Buick Regal with Factory Air Gen IV SureFit™ Evaporator Kit
Part #: 565085
Starting at $1,360.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

**Evaporator kit includes the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, new control panel, hardware and installation instructions.

This Evaporator kit can be utilized for all Regal trims. The new electronic control panel will fit all Regal trims as well and is included in the Evaporator kit.
• There are two options for the Condenser Kit (Turbo and Non-Turbo). If your compressor is mounted on the driver’s side of the vehicle, use the Turbo Condenser kit. If the compressor is located on the Passenger’s side of the vehicle, use the Non-Turbo Condenser kit option.
• There are two Hose kit options, the Standard hose kit and the Modified hose kit. The Standard hose kit will only fit 1986-87 Grand National and T-type. The hose lengths and fittings are specific for these years and trim. For other trims, use the Modified hose kit, which will allow the A/C hoses to be cut to length and fittings to be clocked to your needs.
• At this time, there is only one compressor bracket kit available for the Buick Regal, which is designed to only fit the 1986-87 Grand National and T-type. This bracket kit was designed using a 7B10 compressor. This compact compressor was used due to the tight clearance in the engine bay.
1986-87 GM G-Body (Turbo) Gen IV SureFit™ Condenser Kit with Drier
Part #: 025084
Starting at $320.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This SureFit™ condenser kit has been custom designed by our engineering team to mount directly into your vehicle. In addition to the parallel-flow condenser, the kit includes a receiver/drier, a trinary safety switch, and all of the necessary hardlines and hardware for mounting into a stock configured engine compartment and core support. Detailed installation instructions are also included.
1986-87 Grand National SureFit™ Standard Hose Kit
Part #: 524460
Starting at $220.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This standard hose kit is designed specifically for use with a complete Gen IV SureFit™ system and the stock engine compartment configuration and core support for your vehicle. The kit contains refrigerant hoses with pre-crimped beadlock fittings, along with O-rings and any necessary mounting hardware. Be sure to look at the instructions included with your evaporator kit for hose routing and installation details.
1982-88 GM G-Body SureFit™ Modified Hose Kit
Part #: 525083
Starting at $190.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

This modified hose kit is designed for use with a complete Gen IV SureFit™ system in vehicles without a stock engine compartment configuration and core support. The kit contains refrigerant hoses with pre-crimped beadlock fittings on (1) end, with the other end open to accommodate a custom installation. All necessary fittings, O-rings and mounting hardware are also included, along with detailed installation and crimping instructions.
1958-60 Chevrolet Corvette SureFit™ Complete Kit
Part #: 961059
Starting at $1,925.00

 DOWNLOAD INSTALLATION INSTRUCTIONS

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

**Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

We recommend ordering a complete kit for reliability.

Why replace your worn out OEM air conditioning system with a new Vintage Air “SureFit” kit?

Consider these benefits:

  1. SureFits cost about the same as replacing only an original compressor/evaporator on most cars.
  2. Gen IV systems incorporate modern technology. No balky control cables or sticking vacuum doors
  3. You get a full 3-year warranty and a system designed to outperform your original system. Uses R-12 or environmentally friendly HFC 134a refrigerant.
  4. SureFit systems retain the factory look inside your vehicle, yet improve the under hood appearance by eliminating the heavy factory equipment.
  5. Optional ProLine Series components are compatible with most SureFit systems.
  6. Some 1960s and many 1970s cars cannot be calibrated to work optimally with 134a refrigerant.