Search Results for "1957 chevy pickup"

Steel-eez Chevy 6-Cylinder Brackets 250 Chevy 1963-84 right side mount. (Will not fit with HEI distributor).

Steel-eez Chevy 6-Cylinder Brackets 235-261 Chevy 1955-62 blocksdriver-side top-mount alternator bracket - bottom compressor bracket
Designed to mount compressor and alternator. Fits on driver side. Uses stock pulleys. Uses stock intake and exhaust manifolds.
Includes new double-groove 6-cyl harmonic balancer (May not clear some factory air cleaner assemblies).

Steel-eez Chevy 6-Cylinder Brackets 230 250 292 Chevy 1963-84 driver-side top-mount alternator and bottom mount compressor combination bracket
Designed to mount compressor and alternator. Fits on driver side. Uses stock pulleys. Uses stock intake and exhaust manifolds.
(Note: Not designed for power steering applications. Call for power steering options.)

Steel-eez Chevy 6-Cylinder Brackets 230/250 Chevy 1963-84 driver-side top-mount alternator and bottom mount compressor combination bracket
Designed to mount compressor and alternator. Fits on driver side. Uses stock pulleys. Uses stock intake and exhaust manifolds.
(Note: Not designed for power steering applications. Call for power steering options.)

Steel-eez Chevy 6-Cylinder Brackets 216 and 235 Chevy 1954-earlier driver-side top-mount alternator bracket - bottom mount compressor bracket
Designed to mount compressor and alternator. Fits on driver side. Uses stock pulleys. Uses stock intake and exhaust manifolds.

Steel-eez Chevy 6-Cylinder Brackets 235 Chevy 1955-62 driver-side top-mount alternator bracket/bottom-mount compressor bracket.
Designed to mount compressor and alternator. Fits on driver side. Uses stock pulleys. Uses stock intake and exhaust manifolds.

This Gen IV/Gen 5 SureFit™ control panel conversion kit is designed to work directly with the Gen IV or Gen 5 SureFit™ evaporator system for your vehicle.

The kit includes our patented cable converters with mounting hardware, along with a wiring harness and detailed instructions to convert your OEM lever controls to electronic operation and calibrate for proper function.

This standard hose kit is designed specifically for use with a complete Gen IV SureFit™ system and the stock engine compartment configuration and core support for your vehicle. The kit contains refrigerant hoses with pre-crimped beadlock fittings, along with O-rings and any necessary mounting hardware. Be sure to look at the instructions included with your evaporator kit for hose routing and installation details.

This modified hose kit is designed for use with a complete Gen IV SureFit™ system in vehicles without a stock engine compartment configuration and core support. The kit contains refrigerant hoses with pre-crimped beadlock fittings on (1) end, with the other end open to accommodate a custom installation. All necessary fittings, O-rings and mounting hardware are also included, along with detailed installation and crimping instructions.

This SureFit™ condenser kit has been custom designed by our engineering team to mount directly into your vehicle. In addition to the parallel-flow condenser the kit includes a receiver/drier binary safety switch and all of the necessary hardlines and hardware for mounting into a stock configured engine compartment and core support. Detailed installation instructions with photos are also included.

The Gen 5 is Vintage Air's most powerful and intelligent climate control system. The Gen 5 uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

**Evaporator kit includes the evaporator unit and mounting brackets, louvers (where required), duct hose, wiring harness, our patented Electronic Cable Converters, hardware and installation instructions.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

**Evaporator kit includes the evaporator unit and mounting brackets louvers (where required) duct hose wiring harness our patented Electronic Cable Converters hardware and installation instructions.