Accessories > Compressors

Sanden SD 508 Single wide-groove pulley, Chrome Finish for 3/4 inch belt

Note: The single wide-groove pulley measures 5/8 inch wide at outer-groove edge. You must use a 3/4 inch wide belt for proper belt contact and grip.

Machined clutch cover Model 508 compressor V-groove and multi-groove.

Aluminum Compressor Clutch Covers Smooth custom look keeps compressor clutch clean.

Polished clutch cover Model 508 compressor V-groove and multi-groove

Aluminum Compressor Clutch Covers Smooth custom look keeps compressor clutch clean.

Sanden Direct GM Truck-SUV Replacement Compressor 6-Groove serpentine pulley Standard Finish

Sanden Direct GM Truck-SUV Replacement Compressor 6-Groove serpentine pulley, Polished Finish

Sanden SD 709 Compressor 8-Groove serpentine pulley Standard Finish 7-cylinder 9.5 c.i.

The SD 709 compressor is recommended for any Vintage Air system. It pumps 9.5 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD 709 Compressor 8-Groove serpentine pulley Polished Finish

The SD 709 compressor is recommended for any Vintage Air system. It pumps 9.5 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown. Fits all Vintage Air brackets

Sanden SD-7B10 Compressor 6-groove serpentine pulley Standard Finish

Compact but high-performance compressor. It pumps 6.1 cubic inches per revolution with a maximum 9000 sustained RPM range. (Model SD-7B10).

Sanden SD-7B10 Compressor 6-groove serpentine pulley Polished Finish

Compact but high-performance compressor. It pumps 6.1 cubic inches per revolution with a maximum 9000 sustained RPM range. (Model SD-7B10).

Sanden SD 508 Rear Exit Compressor Double V-groove pulley Rear Exit Standard Finish

Excellent solution to low hood clearance issues. SD 508 compressor with rear exit #8 and #10 male 0-ring fittings. Compatible with standard female O-ring fittings. Also 90-degree TiteFit fittings.

Sanden SD 508 Rear Exit Compressor Double V-groove pulley Rear Exit Polished Finish

Excellent solution to low hood clearance issues. SD 508 compressor with rear exit #8 and #10 male 0-ring fittings. Compatible with standard female O-ring fittings. Also 90-degree TiteFit fittings.

Sanden SD 508 Rear Exit Compressor 7-Groove serpentine pulley Rear Exit Standard Finish

Excellent solution to low hood clearance issues. SD 508 compressor with rear exit #8 and #10 male 0-ring fittings. Compatible with standard female O-ring fittings. Also 90-degree TiteFit fittings.