Vintage Air University
Ford Mount Brackets, Compressor/Alternator
Simple and economical solutions to get your Ford-powered classic air conditioned with ease. Steel plate brackets to mount compressor, alternator and power steering on some applications.
15111-VFB 170-200” Six cylinder compressor bracket.
131109 292-312” Y-Block V8 (T-Bird only). For 507 compressor, use VA #04807-VUA.
131111 272-312” Y-Block comp/alt bracket kit (Requires 3-groove crankshaft pulley or 2-groove add-on pulley, 730004 shown on Page 81). Use rear exit compressor.
131105 289, 302, 351 Windsor driver-side top-mount compressor bracket.
131107 289, 302, 351 Windsor driver-side mid-mount compressor bracket.
131108 289, 302 & 351 Windsor driver-side power steering bracket
131112 289, 302 & 351 Windsor passenger-side alternator bracket
15110-VFB 260” V8 and pre-‘69 289 V8 compressor bracket.
131351 Ford Cleveland V8.
131110 289, 302 V8 1964-68 with idler pulley (single-groove water pump pulley).
131005 332, 352, 360, 390, 406, 410, 427, 428 FE V8 compressor bracket (‘65-up).
15118-VFB 460” V8 1975-80 with or without power steering, air pump.
Ford Flathead Applications
Flathead Mount Brackets, Compressor/Alternator
For use with GM alternator and Sanden compressor. May be used with multiple carburetion. Offset water neck available for ‘49-53 engines. Single wide-groove compressor and alternator available for all installations. (Will not fit with tri-power or Super Dual set-up).
131002 1937-1948 Flathead comp/alternator for use with single wide-groove compressor pulley.
131003 1949 Flathead comp/alternator for use with single wide-groove compressor pulley.
131004 1950-53 Flathead comp/alternator*for use with double standard-groove pulley.
Note: Requires offset water necks (2 per bracket).
70654-VUQ Polished aluminum offset water neck
739001 Chrome GM wide-groove alternator pulley
Vintage Air ProLine Flathead Bracket System, Compressor/Alternator
Vintage Air, with Casey and Jim Cook of Jimco flathead builders developed this stylish and versatile kit. Mounts both compressor and GM 12SI alternator on a brushed or polished aluminum bracket. Mounts to original generator bolt flange and clears most multi-carb setups. For 1937-48, 59 A-B engines. Uses single wide-belt compressor and alternator pulleys.
172008 Machined finish bracket kit
172009 Polished finish bracket kit
Mount Brackets, Compressor/Alternator
Simple and economical solutions to get your Mopar-powered classic air conditioned with ease. Steel plate brackets to mount compressor, alternator and power steering on some apps.
161004 Mopar 318-360 V8 engines, early to 1969 top-mount compressor and alternator.
162774-SDA Mopar 318, 340, 360 V8 with power steering, without smog pump 1970 to 1978 (compressor and alternator bracket).
15121-VMB Mopar V8 (compressor mount only) 1970 to 1982 (without factory air).
161002 Mopar 383/440 compressor and alternator (with power steering only).
166009 1966-70 Mopar 383/440 water pump tensioner kit.
151007 1955-58 Chrysler 331, 354 Hemi and 301, 331, 354 Poly. Mounts compressor and alternator. Includes crank pulley kit. (Requires 042916 alternator and 04807 compressor.)