Vintage Air University

TiteFit Aluminum Hardline Kits
Creates compact and professional looking refrigerant line routing down and close to engine. Kits with ProLine TiteFit nuts built onto line (-VUQ numbers) come fully polished and include machined aluminum line clamps.

For Use With Vintage Air ProLine Compressor Bracket
35135-VUG-A TiteFit line kit, rear-routed suction line, for134a
35135-VUQ-A TiteFit line kit, rear-routed suction line, for134a (polished)
35136-VUG-A TiteFit line kit, front-routed suction line, for134a
35136-VUQ-A TiteFit line kit, front-routed suction line, for134a (polished)
38110-VUQ Double line clamp with bracket and hardware
(Included with all “-VUQ” TiteFit kit part numbers)

For Use With Steel-eez ® Compressor Brackets
35137-VUG-A TiteFit line kit for vehicles using top-mount steel compressor bracket,134a
35137-VUQ-A TiteFit line kit for vehicles using top-mount steel compressor bracket,134a (polished)
38112-VUQ Double line clamp with bracket and hardware
(Included with all “-VUQ” TiteFit kit part numbers)

35135-VUQ-A
Rear-routed suction line. Fits ProLine compressor bracket

35136-VUQ-A
Front-routed suction line. Fits ProLine compressor bracket

35137-VUG-A
For vehicles using top-mount steel compressor bracket

90 Degree TiteFit Fittings
(Shown Left To Right)

366100 #6 TiteFit 90 0 A/C fitting
366101 #8 TiteFit 90 0 A/C fitting
366102 #10 TiteFit 90 0 A/C fitting

Running an OEM Compressor?
OEM Compressor Refrigerant Line O-ring Adapters

34108-VUG GM A-6 and R4 early-style compressor adapter block kit with bolt and O-rings
33602-VUI GM A-6 and R4 offset flange pad seal washer kit
33600-VUI GM A-6 and R4 seal washer for non-O-ring compressor
341080 GM A-6 and R4 complete kit (all 3 above parts)

045008-VUR SD-7B10 Sanden #8 O-ring adapter
045010-VUR SD-7B10 Sanden #10 O-ring adapter
045011 SD-7B10 Sanden #8 O-ring for adapter (polished)
045012 SD-7B10 Sanden #10 O-ring for adapter (polished)
184136 SD-7B10 Sanden Polished 12 point 8mm-1.25 bolt (no washer required)
338604 SD-7B10 Sanden #8 replacement O-ring
338605 SD-7B10 Sanden #10 replacement O-ring

045023 Billet machined GM horizontal compressor rear adapter block flat face
045024 GM vertical compressor rear adaptor block flat face
045017 Ford-style compressor block
045018 Ford-style compressor block

045020 Chrysler HEMI # 8 – 90 Degree compressor Block
045021 Chrysler HEMI # 10 compressor block
045022 Chrysler HEMI # 8 compressor block